About Contact Your Account Cart


1FZFE CAMSHAFTS
The Toyota FZ engine was a 24-valve, 4.5L DOHC straight-6 internal combustion engine manufactured by Toyota to replace the F-series engine. It was used primarily in SUVs because of its large displacement, smoothness, ruggedness and torque. The engine displaced 4476 cc with a bore and stroke measuring 100 millimeters (3.9 in) x 95 millimeters (3.7 in), respectively and a 9.0:1 compression ratio; the head used Toyota's narrow-angle overhead camshafts for better fuel economy.[1] The 1FZ had only two variants available: the 1FZ-F and the 1FZ-FE. The only significant difference between the two was the inclusion of electronic fuel injection on the 1FZ-FE, whereas the 1FZ-F used a carburetor.[2] Starting in 1998, the fuel injected version of the 1FZ-FE was also manufactured with a direct ignition variation available in certain non-US markets (the engine pictured here is that variant discernible by the intake manifold and lack of distributor). The 1FZ-F produced 190 horsepower (140 kW) at 4400 RPM and 268 pound-feet (363 N·m) at 2800 RPM; its fuel injected counterpart produced 212 horsepower (158 kW) at 4600 RPM and 275 pound-feet (373 N·m) at 3200 RPM.

Stage Description Part# Adv. Dur. Dur @ .050 Lift (in) Lift (mm) Kit# Cam Card Dyno Shop Status
BC0356 Custom 1FZFE Camshafts Made To Order. Please email with desired specs and stage requirements. BC0356 In-Stock
619.749.9018 ph
619.749.9128 fx
Some products listed are not legal for sale or use on emission controlled motor vehicles, RPM ranges vary on application.Warranty Information Copyright © Brian Crower Inc. All rights reserved.   Follow runBC on Twitter     
WARNING: This product can expose you to chemicals, including Chromium (hexavalent compounds), lead and lead compounds, which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov