Unfortunately at this time there is not enough demand to produce a billet stroker kit for this particular engine application. If you feel that BC is missing an opportunity, then please feel free to contact us at
Please keep in mind that the minimum order on crankshafts if 5 pieces, so we would need a deposit from five individuals (or one $5000 payment) in order to get them into the production schedule. Stroke determination can be made at that time, but typically we increase the stroke +6mm over stock specs in order to achieve a proper rod center-to-center to stroke ratio. Bore size and compression ratio can be determined on an individual basis. Stock/OEM sample crank, rod and piston is also required. Leadtimes are in the 20 week range after the deposit and samples are received by BC. This scenario applies to any engine not listed on the BC website.
WARNING: This product can expose you to chemicals,
including Chromium (hexavalent compounds), lead and lead
compounds, which are known to the State of California to
cause cancer, birth defects or other reproductive harm. For
more information, visit www.p65warnings.ca.gov