About Contact Your Account Cart

RB26 & RB25 Stroker Kits
The BC stroker kit for the Nissan RB26/RB25 engine incorporates a 79mm stroke, steel billet crankshaft. Depending on bore size that you decide, the BC kit will take you up to a 2.9L with a 87mm bore. The Nissan RB26/RB25 kit utilizes premium steel billet connecting rods. As usual, each BC kit features custom CP or JE pistons, wrist pins, and full ring pack. Big time horsepower and torque gains. Note: Must specify RB26 or RB25 cylinder head when ordering pistons.
  • BC 4340 billet steel crankshaft (79mm stroke).
  • BC 4340 Sportsman or Pro Series connecting rods.
  • CP or JE aluminum forged pistons (any bore size, any compression ratio).
  • 5100 Series carbon steel alloy wrist pins. 9310 Series pin upgrade avail.
  • Ductile iron plasma top rings, tapered second ring, low tension oil rings.
  • Fully system balanced and ready to install. (50% deposit required)
Stock Specification
RB26 86mm Bore x 73.7mm Stroke - 7.421" Block Height
Stroker Kit # Crankshaft # Rod # Piston # Description Buy Now Status
BC0235 BC5235 BC6238 BC7239 2.63L - Includes 4340 billet crank, 73.7mm stroke, H-beam BC625+ rods (4.783 c-to-c), and custom pistons (choice of bore/compression). ACL Race bearings available separately. Call for
Avail.
BC0236 BC5235 BC6239 BC7239 2.63L - Includes 4340 billet crank, 73.7mm stroke, H-beam Sportsman rods (4.783 c-to-c), and custom pistons (choice of bore/compression). ACL Race bearings available separately. Call for
Avail.
BC0238 BC5239 BC6238 BC7239 2.9L - Includes 4340 billet crank, 79mm stroke, H-beam BC625+ rods (4.783 c-to-c), and custom pistons (choice of bore/compression). ACL Race bearings available separately. Call for
Avail.
BC0239 BC5239 BC6239 BC7239 2.9L- Includes 4340 billet crank, 79mm stroke, H-beam Sportsman rods (4.783 c-to-c), and custom pistons (choice of bore/compression). ACL Race bearings available separately. Call for
Avail.
BC0238LW BC5239LW BC6238 BC7239 2.9L - Includes 4340 billet LightWeight crank, 79mm stroke, H-beam BC625+ rods (4.783 c-to-c), and custom pistons (choice of bore/compression). ACL Race bearings available separately. Call for
Avail.
BC0239LW BC5239LW BC6239 BC7239 2.9L - Includes 4340 billet LightWeight crank, 79mm stroke, H-beam Sportsman rods (4.783 c-to-c), and custom pistons (choice of bore/compression). ACL Race bearings available separately. Call for
Avail.
Note: ACL Race Series Bearings are NOT included in this kit. For bearing information click here.
RB30 Stroker Kits
The BC stroker kit for the Nissan RB30 engine incorporates a 90mm stroke, steel billet crankshaft. Depending on bore size that you decide, the BC kit will take you up to a 3.21L with a 87mm bore. The Nissan RB30 kit utilizes premium steel billet connecting rods. As usual, each BC kit features custom CP or JE pistons, wrist pins, and full ring pack. Big time horsepower and torque gains. Note: Must specify cylinder cylinder head when ordering pistons.
  • BC 4340 billet steel crankshaft (90mm stroke).
  • BC 4340 Sportsman or Pro Series connecting rods.
  • CP or JE aluminum forged pistons (any bore size, any compression ratio).
  • 5100 Series carbon steel alloy wrist pins. 9310 Series pin upgrade avail.
  • Ductile iron plasma top rings, tapered second ring, low tension oil rings.
  • Fully system balanced and ready to install. (50% deposit required)
Stock Specification
RB30 86mm Bore x 85mm Stroke 9.075" Block Height
Stroker Kit # Crankshaft # Rod # Piston # Description Buy Now Status
BC0233 BC5230 BC6230 BC7230 3.21L - Includes 4340 billet crank, 90mm stroke, H-beam 7/16 rods (6.000 c-to-c), and custom pistons (choice of bore/compression). ACL Race bearings available separately. Call for
Avail.
Crankshafts
BC crankshafts are made from the finest, aerospace grade 4340 steel billet material. CNC machined on state of the art, 5 axis Mazak Integrex 300-IV CNC machines to exacting tolerances (.0001"). Every crankshaft features large radius journals that add rigidity for high horsepower, high boost, high rpm applications. Gun drilled, CNC ground oil holes feature a smooth surface for extra oiling, tear dropped for added oil scoop, cross drilled for priority main feeding to the rods and micro polished to a mirror finish for optimum bearing lubricity. All cranks are stress relieved, shot peened, magna flux inspected and nitrided (multi step heat treatment) for ultimate performance. Fully profiled counterweights are designed for reduced windage through the crankcase creating less oil resistance for better rpm potential.
Connecting Rods
BC connecting rods are CNC machined from aerospace grade 4340 steel billet, available in your choice of the European influenced H beam or the traditional I beam design (certain applications). All rods feature a deep, double ribbed cap that keeps the big end housing bore true at extended rpm and insures uniform bearing crush, delivering proper clearances for superior oil supply and maximum load carrying capacity. H Beam rods feature a deep radial groove pin bushing and oil holes at 5 and 7 o'clock (the beam acts as a trough), bringing critical lubrication to the critical wrist pin area. I Beam rods feature a oil hole at the 12 o'clock position that keep the pin end bore true at high boost. Available in your choice of ARP2000 fasteners (rated to 210,000 psi) or the ultimate faster, ARP's Custom Age 625+ (rated to 280,000 psi).
Pistons
Choose from the top piston brands available... CP or JE... in any desired bore size and compression ratio. Both brands make their custom BC stroker pistons from 2618 T6 high tensile strength forged aluminum forgings. These forgings are computer designed for strength and minimum weight. Each piston dia is CNC machined to assure optimal accuracy and superior grain flow in the forging process. 3D modeling software and rigorous Finite Element Analysis insure that your pistons are manufactured to the strongest and lightest part possible for your application. Your custom pistons feature tighter clearances, less noise, better ring seal and overall better durability. Standard features include pin fit, carbon steel wrist pins and spiral locks or rail supports depending on application. Added features include upgraded 9310 alloy wrist pins for reduced flex, lateral gas ports to assist in ring seal, skirt and top coatings and lightweight design.
619.749.9018 ph
619.749.9128 fx
Some products listed are not legal for sale or use on emission controlled motor vehicles, RPM ranges vary on application.Warranty Information Copyright © Brian Crower Inc. All rights reserved.   Follow runBC on Twitter