HOME BCジャパン Espanol SHOP ABOUT FAQS Cam Regrind CONTACT
HONDA NISSAN TOYOTA SUBARU BMW MITSUBISHI DOMESTIC
B16A / B18C C30A / C32B SR20DET 2JZ NON VVT-i 2JZ VVT-i EJ205 M50 4G63 CHEVY LS
B18A / B18B K20 / K24 KA24DE 1JZ B58B30 EJ207 N54 4G63 EVO VIII DODGE SRT4
H22 / H22A D16Y8 VQ35 / VQ37 7MGTE 2AZFE EJ257 / EJ255 MINI B48 EVO IX DIESEL TRUCK
F20C / F22C MISC TB48 3SGTE 4AGE EJ257B DUAL S58 / B58 4B11 EVO X JEEP
HYUNDAI RB26 / RB30 1GRFE / 2GRFE 4UGSE FA20 VW / AUDI 6G72 FORD
G6DA V6 VR38DETT 3URFE 1FZFE MAZDA R8/LAMBO V10 COYOTE
G4KF MISC MISC MZR 1.8T ECOBOOST
Type 1 Air Cooled DURATEC

POLARIS HONDA YAMAHA CAN-AM KAWASAKI
XP 1000 PRO R TALON YXZ X3 KRX
XP TURBO

RODSPISTONSSTROKER KITSCRANKSMISC.

Ford Coyote Stroker Kits
The BC stroker kit for the Ford Coyote incorporates a 3.875" stroke, the BC crankshafts are CNC machined from 4340, steel billet material. In order to utilize a quality bearing, the BC cranks and rods are designed with Honda crank pins (1.888" pin w/2.015" BE housing bore). Depending on bore size that you decide, the BC kit will take you up to 5.5L with a safe 3.700" bore using Darton sleeves. The BC Coyote Series kit utilizes premium steel billet connecting rods. As usual, each BC kit features custom CP or JE pistons, wrist pins, and full ring pack. Big time horsepower and torque gains.
  • BC 4340 billet crankshaft, gun drilled for weight savings, features 1.888" crank pins.
  • BC 4340 steel billet H Beam connecting rods equipped with ARP2000 7/16" fasteners and features 2.015" housing bore.
  • Choice of CP or JE custom pistons made to any spec.
  • 5100 alloy wrist pins and ductile iron plasma top rings, tapered second ring, low tension oil rings.
  • ACL Race Series rod and main bearings are available for additional cost.
  • Available as fully system balanced and ready to install for additional cost or self balance.
Stock Specification
5.0L 3.630" Bore x 3.650" Stroke - 8.937" Block Height
Stroker Kit # Crankshaft # Rod # Piston # Description Buy Now Status
BC0426 BC5428 BC6426 BC7429 Coyote - Includes 4340 billet crank (3.750" stroke w/1.888" rod journals), HD Series rods (5.875" c-to-c) 7/16" ARP fasteners, choice of shelf Manley or JE pistons (see bore & comp listings avail in Pistons). Call for
Avail.
BC0427 BC5429 BC6427 BC7429 Coyote - Includes 4340 billet crank (3.875" stroke w/1.888" rod journals), HD Series rods (5.825" c-to-c) 7/16" ARP fasteners choice of shelf Manley or JE pistons (see bore & comp listings avail in Pistons). Call for
Avail.
BC0428 BC5428 BC6426 BC7429 Coyote - Includes 4340 billet crank (3.750" stroke w/1.888" rod journals), HD Series rods (5.875" c-to-c) 7/16" ARP fasteners, CP custom pistons (any bore and compression). Call for
Avail.
BC0429 BC5429 BC6427 CP7429 Coyote - Includes 4340 billet crank (3.875" stroke w/1.888" rod journals), H-beam rods (5.933" c-to-c) 7/16" ARP fasteners, CP custom pistons (any bore and compression) Call for
Avail.
Crankshafts
BC crankshafts are made from the finest, aerospace grade 4340 steel billet material. CNC machined on state of the art, 5 axis Mazak Integrex 300-IV CNC machines to exacting tolerances (.0001"). Every crankshaft features large radius journals that add rigidity for high horsepower, high boost, high rpm applications. Gun drilled, CNC ground oil holes feature a smooth surface for extra oiling, tear dropped for added oil scoop, cross drilled for priority main feeding to the rods and micro polished to a mirror finish for optimum bearing lubricity. All cranks are stress relieved, shot peened, magna flux inspected and nitrided (multi step heat treatment) for ultimate performance. Fully profiled counterweights are designed for reduced windage through the crankcase creating less oil resistance for better rpm potential.
Connecting Rods
BC connecting rods are CNC machined from aerospace grade 4340 steel billet, available in your choice of the European influenced H beam or the traditional I beam design (certain applications). All rods feature a deep, double ribbed cap that keeps the big end housing bore true at extended rpm and insures uniform bearing crush, delivering proper clearances for superior oil supply and maximum load carrying capacity. H Beam rods feature a deep radial groove pin bushing and oil holes at 5 and 7 o'clock (the beam acts as a trough), bringing critical lubrication to the critical wrist pin area. I Beam rods feature a oil hole at the 12 o'clock position that keep the pin end bore true at high boost. Available in your choice of ARP2000 fasteners (rated to 210,000 psi) or the ultimate faster, ARP's Custom Age 625+ (rated to 280,000 psi).
Pistons
Choose from the top piston brands available... CP or JE... in any desired bore size and compression ratio. Both brands make their custom BC stroker pistons from 2618 T6 high tensile strength forged aluminum forgings. These forgings are computer designed for strength and minimum weight. Each piston dia is CNC machined to assure optimal accuracy and superior grain flow in the forging process. 3D modeling software and rigorous Finite Element Analysis insure that your pistons are manufactured to the strongest and lightest part possible for your application. Your custom pistons feature tighter clearances, less noise, better ring seal and overall better durability. Standard features include pin fit, carbon steel wrist pins and spiral locks or rail supports depending on application. Added features include upgraded 9310 alloy wrist pins for reduced flex, lateral gas ports to assist in ring seal, skirt and top coatings and lightweight design.
619.749.9018 ph
619.749.9128 fx
Some products listed are not legal for sale or use on emission controlled motor vehicles, RPM ranges vary on application.Warranty Information Copyright © Brian Crower Inc. All rights reserved..
WARNING: This product can expose you to chemicals, including Chromium (hexavalent compounds), lead and lead compounds, which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov