|
|
|
 |
1JZGTE Valve Spring & Retainer Kits
Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. BC titanium retainers are CNC machined from 6AL4V round bar titanium to exacting tolerances. |
 |
|
Kit # |
|
Spring # |
|
Retainer # |
|
Seat # |
|
Description |
|
Buy Kit |
|
Status |
|
|
| BC0300 |
BC1300 |
BC2300-24 |
No Seat |
Single spring, titanium retainer - rated to 800whp |
 |
In-Stock |
|
| BC0300S |
BC1300 |
BC2300S-24 |
No Seat |
Single spring, steel retainer - rated to 800whp |
|
In-Stock |
|
| BC0300HD |
BC1300HD |
BC2300-24 |
No Seat |
Single spring, titanium retainer - rated above 800whp |
|
In-Stock |
|
| BC0300SHD |
BC1300HD |
BC2300S-24 |
No Seat |
Single spring, steel retainer - rated above 800whp |
|
In-Stock |
|
|
Spring Pressure: BC1300 Seat: 1.325" @ 80 lbs / Open: 0.980" @ 158 lbs / Coil Bind: 0.810" (no machine work required)
Spring Pressure: BC1310 Seat: 1.325" @ 82 lbs / Open: 0.925" @ 180 lbs / Coil Bind: 0.730" (no machine work required)
Spring Pressure: BC1300HD Seat: 1.320" @ 102 lbs / Open: 0.900" @ 215 lbs / Coil Bind: 0.835" (no machine work required)
|
|
|
|
1JZGTE Valve Keepers / Locks
6mm stem diameter, 6° billet performance valve stem keepers or locks are designed to fit BC and OEM retainers. Precision machined from premium billet bar stock chromoly steel and heat treated for maximum strength to insure against shoulder shearing (common with stock and lesser quality brands). |
 |
|
|
Part # |
|
Description # |
|
Buy Kit |
|
Status |
|
|
| BC2950 |
6° Billet Keepers / Locks for Toyota 1JZGTE applications |
|
In-Stock |
|
|
|
|
|
1JZGTE Stainless Steel Valves
BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finish under the head. |
 |
|
|
Part # |
|
Description |
|
Buy Now |
|
Status |
|
|
| BC3300 |
33.6mm Intake (+1.6mm head diameter) |
|
In-Stock |
|
| BC3312 |
33.0mm Intake (+1mm head diameter) |
|
In-Stock |
|
| BC3313 |
31.0mm Exhaust (+1mm head diameter) |
|
Out of Stock |
|
|
|
619.749.9018 ph
619.749.9128 fx
|
| Some products listed are not legal for sale or use on emission controlled motor vehicles, RPM ranges vary on application.Warranty Information Copyright © Brian Crower Inc. All rights reserved.. |
|
|
 |
WARNING: This product can expose you to chemicals,
including Chromium (hexavalent compounds), lead and lead
compounds, which are known to the State of California to
cause cancer, birth defects or other reproductive harm. For
more information, visit www.p65warnings.ca.gov |
|
 |
|
|
|
