BCジャパン Habla Espanol Online Store Clearance Items About FAQs Contact

3SGTE Valve Spring & Retainer Kits
Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. BC titanium retainers are CNC machined from 6AL4V round bar titanium to exacting tolerances.
Kit # Spring # Retainer # Description Buy Kit Status
BC0350 BC1351 BC2351 Single spring, titanium retainer used on shim under bucket In-Stock
BC0350-2 BC1300-16 BC2300-16 Single spring, titanium retainer used on shim over bucket and shimless bucket only or SERIOUS DAMAGE may occur. In-Stock
BC0350S-2 BC1300-16 BC2300S-16 Single spring, steel retainer used on shim over bucket and shimless bucket only or SERIOUS DAMAGE may occur. In-Stock
Note: If using the OEM/factory retainer, use BC1351 valve spring.
Spring Pressure: BC1351 Seat: 1.350" @ 85 lbs / Open: 0.900" @ 200 lbs / Coil Bind: 0.820" (no machine work required)
Spring Pressure: BC1300-16 Seat: 1.350" @ 85 lbs / Open: 0.900" @ 200 lbs / Coil Bind: 0.800" (no machine work required)
3SGTE Valve Keepers / Locks
6mm valve stem diameter, 6° billet performance valve stem keepers or locks are designed to fit BC and OEM retainers. Precision machined from premium billet bar stock chromoly steel and heat treated for maximum strength to insure against shoulder shearing (common with stock and lesser quality brands).
Part # Description # Buy Kit Status
BC2951 6° Billet Keepers / Locks for Toyota 3SGTE applications In-Stock
3SGTE Stainless Steel Valves
BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finish under the head.
Part # Description Buy Now Status
BC3352 33.5mm Intake (Standard head diameter) In-Stock
BC3353 29.0mm Exhaust (Standard head diameter) In-Stock
BC3350 34.0mm Intake (+.5 head diameter) In-Stock
BC3351 29.5mm Exhaust (+.5 head diameter) In-Stock
BC3354 34.5mm Intake (+1mm head diameter) In-Stock
BC3355 30.0mm Exhaust (+1mm head diameter) In-Stock
BC premium valves guides are made from Manganese Silicon Aluminum Bronze alloy and CNC machined to exacting tolerances. BC guides are resistant to cracking and corrosion, while reducing friction and insures high lubrication even at elevated engine temperatures and rpm's. The perfect replacement to worn or damaged guides and 100% compatible with BC's lineup of stainless steel valves.
Part # Description Buy Now Status
BC3936 6.0mm INTAKE (Toyota 3SGTE/GE) In-Stock
BC3937 6.0mm EXHAUST (Toyota 3SGTE/GE) In-Stock
619.749.9018 ph
619.749.9128 fx
Some products listed are not legal for sale or use on emission controlled motor vehicles, RPM ranges vary on application.Warranty Information Copyright © Brian Crower Inc. All rights reserved..   Follow runBC on Twitter     
WARNING: This product can expose you to chemicals, including Chromium (hexavalent compounds), lead and lead compounds, which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov