
|
|
ECOBOOST DARTON SLEEVES
The Darton MID™ Sleeve Kit is available for many series of 4, 6, and 8 cylinder import and domestic engines and provides for maximum bore sizes and boost potential. The benefits of our MIDseries kits are:
Cast iron performance in an aluminum block
Improved block integral strength
Improved cooling
Kits can be installed by your local machine shop
"Wet sleeve" replace-ability
Full installation manual available on website
Increased horsepower output potential |
High boost and horsepower potential
Superior oil and compression control
Superior cylinder sealing and ring wear
Street or strip application
Bulletproof Darton ductile iron,
130,000-psi tensile strength |
|
 |
 |
 |
Part # |
 |
Description # |
 |
Darton P/N |
 |
Bore Size |
 |
Semi Bore |
 |
O.D. |
 |
Wall Thk |
 |
Length |
 |
Flange Thk |
 |
Flange Dia |
 |
Buy Now |
 |
Status |
 |
 |
BC8040 |
BLOCK SLEEVES - Darton M.I.D. (Ford EcoBoost) |
700-130 |
3.400” |
n/a |
3.950" |
0.203" |
5.950" |
0.500" |
4.840" |
 |
In-Stock |
 |
|
 |
619.749.9018 ph
619.749.9128 fx
|
Some products listed are not legal for sale or use on emission controlled motor vehicles, RPM ranges vary on application.Warranty Information Copyright © Brian Crower Inc. All rights reserved.. |
|
|
 |
WARNING: This product can expose you to chemicals,
including Chromium (hexavalent compounds), lead and lead
compounds, which are known to the State of California to
cause cancer, birth defects or other reproductive harm. For
more information, visit www.p65warnings.ca.gov |
|
 |
|
|
|