CAMSHAFTSVALVE TRAINCONNECTING RODSPISTONSSTROKER KITSCRANKSHAFTSHEADS / CASES |
|
 |
Can-Am Maverick X3 (ROTAX 900 ACE) Stroker Kits
The BC stroker kit for the Can-Am X3 engine platform incorporates a 73.5mm (+3.8mm) stroke in the OEM crank pin configuration. This 73.5mm stroke along with the stock 74mm bore turns the ROTAX 900 into a square engine which delivers the perfect balance of speed and pulling capability. Depending on bore size that you decide, the BC kit will take you up to a 948.35cc with stock 74mm bore or 974.17cc with the big bore 75mm configuration. Due to the added stroke and absolute zero room in the OEM case, you are required to source an aftermarket billet girdle for added stroker clearance. As usual, each BC kit features your choice of custom CP, JE or BME aluminum forged pistons, 5100 series wrist pins (9310 pins available upon request for big HP applications), locks and complete ring pack. Available in any desired bore and compression ratio. Stock stroke 69.7mm billet crankshafts also available as OEM replacement with added counterweight mass for proper balancing characteristics.
- BC 4340 billet steel crankshaft (73.5mm stroke). Requires aftermarket billet girdle for case.
- BC 4340 steel billet crankshaft (69.7mm stock stroke).
- BC 4340 ProH2K or Pro Series (ProH625+) connecting rods featuring ARP premium fasteners.
- CP, JE or BME aluminum forged pistons (any bore size, any compression ratio).
- 5100 Series carbon steel alloy wrist pins. 9310 Series pin upgrade avail.
- Ductile iron plasma top rings, tapered second ring, low tension oil rings.
- Fully system balanced and ready to install. (50% deposit required)
|
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
Stock Specification
ROTAX 900 Ace 74mm Bore x 69.7 Stroke - 7.180" Case Height |
|
 |
 |
 |
 |
 |
 |
 |
 |
Stroker Kit # |
 |
Crankshaft # |
Rod # |
Piston # |
 |
Description |
 |
Buy Now |
 |
Status |
 |
 |
BC0938 |
BC5931 |
BC6932 |
BC7931 - or - BC7932 |
BC STROKER KIT - BC 4340 Crank (73.5mm), BC Pro625+ Rods, CP, JE or BME Custom Pistons |
 |
In-Stock |
 |
BC0937 |
BC5931 |
CA6932 |
BC7931 - or - BC7932 |
BC STROKER KIT - BC 4340 Crank (73.5mm), Carrillo Rods, CP, JE or BME Custom Pistons |
 |
In-Stock |
 |
BC0935 |
BC5930 |
BC6932 |
CP or JE Shelf |
BC NON STROKER KIT - BC 4340 Crank (69.7mm), BC Pro625+ Rods, CP, or JE Shelf Pistons |
 |
In-Stock |
 |
BC0936 |
BC5930 |
CA6932 |
CP or JE Shelf |
BC NON STROKER KIT - BC 4340 Crank (69.7mm), Carrillo Rods, CP, or JE Shelf Pistons |
 |
In-Stock |
 |
|
 |
619.749.9018 ph
619.749.9128 fx
|
Some products listed are not legal for sale or use on emission controlled motor vehicles, RPM ranges vary on application.Warranty Information Copyright © Brian Crower Inc. All rights reserved.. |
|
|
 |
WARNING: This product can expose you to chemicals,
including Chromium (hexavalent compounds), lead and lead
compounds, which are known to the State of California to
cause cancer, birth defects or other reproductive harm. For
more information, visit www.p65warnings.ca.gov |
|
 |
|
|
|