CAMSVALVE TRAINRODSPISTONSSTROKER KITSCRANKSHEADS / CASES |
|
|
 |
CAN-AM MAVERICK X3 TURBO / ROTAX 900 ACE VALVE SPRING & RETAINER KITS
Designed for high rpm, BC beehive valve springs by PAC Racing are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. BC steel and titanium retainers are CNC machined from round bar to exacting tolerances and will deliver unprecedented wear resistance for the life of the engine. |
 |
|
Kit # |
|
Spring # |
|
Retainer # |
|
Seat # |
|
Description |
|
Buy Kit |
|
Status |
|
|
| BC0930X |
BC1930 |
BC2903 |
No Seat |
Single beehive spring, steel retainer, no spring seat (use OE seat) |
 |
In-Stock |
|
| BC0930TX |
BC1930 |
BC2903T |
No Seat |
Single beehive spring, titanium retainer, no spring seat (use OE seat) |
|
In-Stock |
|
| BC0930 |
BC1930 |
BC2903 |
BC2913 |
Single beehive spring, steel retainer, integrated spring seat/seal |
|
In-Stock |
|
| BC0930T |
BC1930 |
BC2903T |
BC2913 |
Single beehive spring, titanium retainer, integrated spring seat/seal |
|
In-Stock |
|
|
| Spring Pressure: BC1903 Seat: 1.130" @ 70 lbs / Open: 0.730" @ 205 lbs / Coil Bind: 0.660" (no machine work required) Maximum lift on valve springs is .430". |
|
|
|
Can-Am Maverick X3 Turbo Valves
BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finish under the head. |
 |
|
|
Part # |
|
Description |
|
Buy Now |
|
Status |
|
|
| BC3830 |
Stainless Steel - 29.0mm Intake (standard head diameter) - Set/6 |
|
In-Stock |
|
| BC3831-N |
Inconel - 25.0mm Exhaust (standard head diameter) - Set/6 |
|
In-Stock |
|
| BC3832 |
Stainless Steel - 30.0mm Intake (+1mm head diameter) - Set/6 |
|
In-Stock |
|
| BC3833-N |
Inconel - 26.0mm Exhaust (+1mm head diameter) - Set/6 |
|
In-Stock |
|
|
|
CAN-AM X3 VALVE GUIDES
BC premium valves guides are made from Manganese Silicon Aluminum Bronze alloy and CNC machined to exacting tolerances. BC guides are resistant to cracking and corrosion, while reducing friction and insures high lubrication even at elevated engine temperatures and rpm's. The perfect replacement to worn or damaged guides and 100% compatible with BC's lineup of stainless steel valves. |
 |
|
|
Part # |
|
Description |
|
Buy Now |
|
Status |
|
|
| BC3963 |
5.0mm INTAKE/EXHAUST (Can-Am X3 / ROTAX 900) |
|
NA |
|
|
|
619.749.9018 ph
619.749.9128 fx
|
| Some products listed are not legal for sale or use on emission controlled motor vehicles, RPM ranges vary on application.Warranty Information Copyright © Brian Crower Inc. All rights reserved.. |
|
|
 |
WARNING: This product can expose you to chemicals,
including Chromium (hexavalent compounds), lead and lead
compounds, which are known to the State of California to
cause cancer, birth defects or other reproductive harm. For
more information, visit www.p65warnings.ca.gov |
|
 |
|
|
|
